Code: Select all
1920x1080 - GTX1660Ti - No V-Sync - No FPS limiter - No driving
---------------------------------------------------------------
2xMS + 2xSGSS = 144 fps
4xMS + 4xSGSS = 138 fps
8xMS + 8xSGSS = 125 fps
8xS (combined 1x2 SS + 4xMS) + 4xSGSS = 138 fps
16xS (combined 2x2 SS + 4xMS) + 4xSGSS = 138 fps
32xS (combined 2x2 SS + 8xMS) + 8xSGSS = 125 fps
thanks for your reply but for information in my case increasing -mm_max_resource_size and -mm_max_tmp_buffers_size it really kills the traffic density. the motorways are really empty, cities also and as soon as I remove these rules from the launch options the high traffic is back and most important no FPS drop (playing with my traffic density mod), ATS it's really amazing now, unfortunately ETS2 still suffers in cities old and new... hope that ETS2 will catch up one day ATS because this is how should be! perfect!
-page size increase to 20 is perfect, this doesn't affect the traffic density, the other two parameters it does affect traffic for me so I removed themif a truck has too big files will still load only with an innocent warning message ;)
BenganJ wrote: ↑March 14th, 2020, 2:10 pm@black-coffee
Good to hear that you have found some parameters that work better.
The gaming environment is so different for all of us that it can pay off
to test the alternative settings rather than using the default ones that
is shown in first post.
@roextended2020
1. This scheme ONLY works when you set Scaling to 100%, it was the same on DX9.
What happens if you use any other setting is that you LOSE AA!
2. That's a good question because if I can remember correctly MFAA ONLY works
if there's already MSAA in place, then it can make so the a lower level of MSAA
together with MFAA will act as almost the same AA, but with better performance!
In DX9 I tested that, but to be honest, I haven't done that in DX11 yet. The question
is if FORCED MSAA, the one we use is enough OR if it MUST be implemented in the
game. So please, be my guest and test that you too and report your result back
here!!
3. Yes, as black-coffee says in the post above yours, density of AI traffic is a BIG FPS
killer, so set g_traffic at a proper value AND try some sort of FPS cap to ease the
work on the GPU, such as G-Sync, FreeSync, V-sync .....! There are several Frame
Rate Limiters in NPI e-g-!
Want to be perfectly clear not a computer tech and my knowledge on graphics is limited.JHTrucker wrote: ↑March 14th, 2020, 2:31 pm@LarryA - GPUs x 2 Evga GTX 1080 ICX SLI "No"
Do you purposely disable SLI for ATS or can't you get it to work?
Just wondering as i'd noticed some time ago that the ATS profile doesn't include an SLI code but the ETS2 profile does.
Perhaps copy the ETS2 SLI code and paste into ATS to check?
I've never used SLI so this is just a guess!
Feel free to try or ignore.
Thank you sir. Please understand. Complete uninstall of ATS before starting this guide. Wanted a fresh ATS. Then did a complete uninstall of the Graphics Driver See Below How To. Wanted everything "Fresh" to eliminate any possibility of errors and or conflicts with DX 11 and NPI. Understand Microsoft stopped support for DX 11 versions around 8.0 or 8.1 windows 7 "Only". This is "Required O.S. 7" Use AERO Basic Theme Only in order for DX 11, NPI to function properly with SCS ATS. "Note" Windows 8 and Windows 10 Does "Not Required" a change to AERO Basic Themes.
