[DX11] Help regarding Nvidia Profile Inspector (NPI)

[BenganJ]

@DedaToro

Please, try to explain more in detail! Are you struggling to get up to FPS=30 or
is it a problem to get the FPS limited to 30?

[DedaToro]

@BenganJ

I'm struggling to lock on to 30fps.

On the menu view, I can get 50-60fps.
But when playing, the fps immediately fell unstable.
Sometimes at 20-25fps it can be even worse below 20fps.
Often makes it difficult for me to play.

[BenganJ]

@DedaToro

I have friends using a GTX1050 card with 4xAA without any problems, so it
must be something you have done causing this problem. So please, take as
many screenshots as needed to show us all settings in NPI. Also post your
latest game log!

EDIT: Please, also tell us which resolution and refresh rate you use on your
monitor!

[DedaToro]

@BenganJ

I have included a short video that might help you analyze the problem
https://drive.google.com/file/d/1eoyVGw ... sp=sharing

[BenganJ]

@DedaToro

Okay, I haven't looked at all settings yet, but can you try this?
In config.cfg set r_mode_refresh "0". As of now, you tell the
game two competing things, use FPS=60 and at the same time
use FPS=30. I can see that you have 2xAA and your card should
easily work with that.

[DedaToro]

@BenganJ

I just tried your suggestion.
I can now hit 30-40fps even in night conditions although sometimes it drops to 20-25fps.
But it's better than before.

[BenganJ]

@DedaToro

Well, glad that it at least got stable. I have to leave here now, but I'll
continue to look at your settings and will be back tomorrow again!

[DedaToro]

@BenganJ

Hello, still with the settings you suggest, why did I experience a decrease in fps to below 20fps?
I often experience incidents like this. One time I was able to hit 30fps but another time it suddenly fell back below 20fps. I didn't mess with any settings though.

It's things like that that make me dizzy until now. It's hard to get the settings right.

[FormelLMS]

I'm to dumb to get a proper triple setup. Downloaded the multimon, enabled in in config but the view is totally wrong in angle. I've read everything, but didn't understand something. I've 3 27 inch monitors with 8mm bezels and they are on 40 degrees nounted.

I hope someone can point me to it.

[JHTrucker]

@FormelLMS - The step 2 triple is game standard 45 degrees.

Menu of all multimon configs i've made:
viewtopic.php?p=17658#p17658

You probably want this one:
Triple Monitor AA setup with reduced left/right monitor angles (Updated 10/03/2021).
viewtopic.php?p=20195#p20195