[REL]Road to Africa 1.0.1 for ETS2 1.48 by TerraMaps

michiematheus
Posts: 6
Joined: September 14th, 2023, 8:27 pm

Re: [REL]Road to Africa 1.0.1 for ETS2 1.48 by TerraMaps

Post by michiematheus » September 16th, 2023, 7:58 pm

Tapir wrote:
September 16th, 2023, 7:31 pm
1.Impossible for me! Do you really use GMC`s loadorder (This is tested and works for many and also for me!

2. Do you really look at a correct pre setup ? You have also to edit your steam start options.
I don't have ALL the Packs they have but, i'm following the order written in the Official ProMods page, with the exception that in the place of Maghreb i have Road to Africa
I have ProMods, RusMap, Road to Africa, & RoExtended along-side with their respective road connection and load order... I'm assuming it might be the fact i don't have the *exact* same load order as GMC has, which may be the reason why i'm crashing, but if that were to be the case, the others would crash aswell no? I'm currently doing a Integrity File Check on Steam hoping that it's just my old drive causing this issue, because i can't seem to find any other reason for the game to just crash.

I have around 5GB of RAM Available before crashing, all the temperatures both cpu and gpu are on the houses or 62 ~ 70ºC, fps are above 60... the game just closes, the only "logical" solution to this is a corrupt file trying to load????
I've been rounding up on this the last 2 days 😅
michiematheus
Posts: 6
Joined: September 14th, 2023, 8:27 pm

Re: [REL]Road to Africa 1.0.1 for ETS2 1.48 by TerraMaps

Post by michiematheus » September 16th, 2023, 8:11 pm

michiematheus wrote:
September 16th, 2023, 7:58 pm
Tapir wrote:
September 16th, 2023, 7:31 pm
1.Impossible for me! Do you really use GMC`s loadorder (This is tested and works for many and also for me!

2. Do you really look at a correct pre setup ? You have also to edit your steam start options.
I don't have ALL the Packs they have but, i'm following the order written in the Official ProMods page, with the exception that in the place of Maghreb i have Road to Africa
I have ProMods, RusMap, Road to Africa, & RoExtended along-side with their respective road connection and load order... I'm assuming it might be the fact i don't have the *exact* same load order as GMC has, which may be the reason why i'm crashing, but if that were to be the case, the others would crash aswell no? I'm currently doing a Integrity File Check on Steam hoping that it's just my old drive causing this issue, because i can't seem to find any other reason for the game to just crash.

I have around 5GB of RAM Available before crashing, all the temperatures both cpu and gpu are on the houses or 62 ~ 70ºC, fps are above 60... the game just closes, the only "logical" solution to this is a corrupt file trying to load????
I've been rounding up on this the last 2 days 😅
IT STILL DOES.
Well, the only thing remaining is me not having the whole combo... Oh well
User avatar
Tapir
VIP
Posts: 4175
Joined: December 15th, 2018, 3:07 pm
Location: Stratford, UK

Re: [REL]Road to Africa 1.0.1 for ETS2 1.48 by TerraMaps

Post by Tapir » September 16th, 2023, 8:23 pm

@michiematheus:
When you follow the order written by promods, you get lost.

Look here (forum) for a tested loadorder and then it works. MOD MANAGER ORDER

System: Windows 11 PRO
Processor: Intel i7-12700KF 5GHZ
Motherboard: Gigabyte B760 DS3H AX
Memory: Corsair DDR5-6000 32 GB
Storage: Samsung 990 M2 SSD + 2 Samsung 870 SSD
Graphics: Asus GeForce Dual RTX 3060 V2 12GB GDDR6
michiematheus
Posts: 6
Joined: September 14th, 2023, 8:27 pm

Re: [REL]Road to Africa 1.0.1 for ETS2 1.48 by TerraMaps

Post by michiematheus » September 16th, 2023, 10:03 pm

Tapir wrote:
September 16th, 2023, 8:23 pm
@michiematheus:
When you follow the order written by promods, you get lost.

Look here (forum) for a tested loadorder and then it works. MOD MANAGER ORDER
Okey Dokey, thanks =D
User avatar
Tapir
VIP
Posts: 4175
Joined: December 15th, 2018, 3:07 pm
Location: Stratford, UK

Re: [REL]Road to Africa 1.0.1 for ETS2 1.48 by TerraMaps

Post by Tapir » September 16th, 2023, 10:29 pm

You are welcome.
You are safe and without crashes when you follow GMC's loadorders. This is tested and works 100%.

System: Windows 11 PRO
Processor: Intel i7-12700KF 5GHZ
Motherboard: Gigabyte B760 DS3H AX
Memory: Corsair DDR5-6000 32 GB
Storage: Samsung 990 M2 SSD + 2 Samsung 870 SSD
Graphics: Asus GeForce Dual RTX 3060 V2 12GB GDDR6
Tomsun66
PPM
Posts: 53
Joined: August 3rd, 2020, 8:56 am

Re: [REL]Road to Africa 1.0.1 for ETS2 1.48 by TerraMaps

Post by Tomsun66 » September 16th, 2023, 11:22 pm

Tapir wrote:
September 16th, 2023, 7:16 pm
Think Tomsun66, that you better post your ideas at the right place, that means the place where you could reach most of the modders : https://terramaps.net/forum/
Theoretically a good idea, but i think you have had never a view at that forum (yes i have a subscription also there)

There are two threads regarding Road to africa
one asking for a link to the old version
second a thread with last entry in 2022

that makes me not confident to reach the modders there, with the sam argument you can ask everone posting a potential issue why here and not in the terramapsforum.

Indeed it should be the first adress to reach the modders and to make any issue-reports, i agree, but reality shows it is much more easy to reach at least olaf here in the Roex-Forum. I did not open every thread in the terramapsforum, but i found only these two threads with a headline Road to Africa, if i have overseen the regarding thread please show which one you mean.


WAIT probably i found the thread

https://terramaps.net/forum/threads/rel ... -1-48.258/

Perhaps olaf should open a seperate Thread for bug reports
User avatar
Tapir
VIP
Posts: 4175
Joined: December 15th, 2018, 3:07 pm
Location: Stratford, UK

Re: [REL]Road to Africa 1.0.1 for ETS2 1.48 by TerraMaps

Post by Tapir » September 16th, 2023, 11:38 pm

https://terramaps.net/forum/threads/rel ... 258/page-4 <---- here you are at the right place :grin:

The whole Terramaps will have a look at the forum and questions and suggestions are there always welcome. :smile3:

System: Windows 11 PRO
Processor: Intel i7-12700KF 5GHZ
Motherboard: Gigabyte B760 DS3H AX
Memory: Corsair DDR5-6000 32 GB
Storage: Samsung 990 M2 SSD + 2 Samsung 870 SSD
Graphics: Asus GeForce Dual RTX 3060 V2 12GB GDDR6
Tomsun66
PPM
Posts: 53
Joined: August 3rd, 2020, 8:56 am

Re: [REL]Road to Africa 1.0.1 for ETS2 1.48 by TerraMaps

Post by Tomsun66 » September 17th, 2023, 1:12 am

I hope you are right @Tapir , compaired to this thread here the thread in the terramaps forum is kinda dead. in comparison it seems morethat the official thread is here in Roex, i have not looked so far how it is with route to Asia.
User avatar
Tapir
VIP
Posts: 4175
Joined: December 15th, 2018, 3:07 pm
Location: Stratford, UK

Re: [REL]Road to Africa 1.0.1 for ETS2 1.48 by TerraMaps

Post by Tapir » September 17th, 2023, 1:17 am

Wait until Olaf is again on, he is the administator on terramaps.

System: Windows 11 PRO
Processor: Intel i7-12700KF 5GHZ
Motherboard: Gigabyte B760 DS3H AX
Memory: Corsair DDR5-6000 32 GB
Storage: Samsung 990 M2 SSD + 2 Samsung 870 SSD
Graphics: Asus GeForce Dual RTX 3060 V2 12GB GDDR6
michiematheus
Posts: 6
Joined: September 14th, 2023, 8:27 pm

Re: [REL]Road to Africa 1.0.1 for ETS2 1.48 by TerraMaps

Post by michiematheus » September 17th, 2023, 9:05 pm

Tapir wrote:
September 16th, 2023, 10:29 pm
You are welcome.
You are safe and without crashes when you follow GMC's loadorders. This is tested and works 100%.
Finally, I had some patience & Time to dedicate on it, after some big brain moments, & A lot of "Ugh's", I gave a try to the load order, & Calmly read everything...
I reached a point i was almost giving up because even with the GMC's E X A C T load order it was still happening... Until i seen the "Buffer Size" on the .config file to increase it from 10 to 50, AFTER THAT WAS DONE. It FINALLY WORKED!

Patience & a calm mindset is key solution to every problem...
I can finally relax xD

Thanks for all the support, your guide + the GMC's Tutorials i was finally able to get it to work properly! I can finally sleep at night :acute:
Post Reply