[DX11] Help regarding Nvidia Profile Inspector (NPI)
Re: [DX11] Help regarding Nvidia Profile Inspector (NPI)
@clear F1
Maybe I misunderstand you, but if you tested yesterday, with a new profile with ONLY RoEx2.6 in it and there were NO problems,
then it might be one or more mods in your combo profile that makes this happen. If you too suspect that, start with a new profile
and add ONE mod, or map, at a time to it and test in between. Start with the maps!
Maybe I misunderstand you, but if you tested yesterday, with a new profile with ONLY RoEx2.6 in it and there were NO problems,
then it might be one or more mods in your combo profile that makes this happen. If you too suspect that, start with a new profile
and add ONE mod, or map, at a time to it and test in between. Start with the maps!
Re: [DX11] Help regarding Nvidia Profile Inspector (NPI)
I added mods from my new profile yesterday, but none were identified.
I restored it from backup, do I want to start again?
In that case, do you only set r_buffer_page_size "30" in config.cfg? Is “8192” set and is it Vsinc “2”?
Is it OK to leave the NPI as it is?
Is there anything like mod batting?
I did the work of inserting mods one by one even with GTX 1070, but I could not find suspicious ones.
I restored it from backup, do I want to start again?
In that case, do you only set r_buffer_page_size "30" in config.cfg? Is “8192” set and is it Vsinc “2”?
Is it OK to leave the NPI as it is?
Is there anything like mod batting?
I did the work of inserting mods one by one even with GTX 1070, but I could not find suspicious ones.
AMD Ryzen 7 7800X3D
ASRock X670E Taichi Carrara
DOMINATOR TITANIUM DDR5-7200 32GB
PNY RTX4070Ti 12GB VERTO LED WE
WD m.2 KIOXIA m.2
ASRock X670E Taichi Carrara
DOMINATOR TITANIUM DDR5-7200 32GB
PNY RTX4070Ti 12GB VERTO LED WE
WD m.2 KIOXIA m.2
Re: [DX11] Help regarding Nvidia Profile Inspector (NPI)
In what area this is hapening? (city not coordinates)
Re: [DX11] Help regarding Nvidia Profile Inspector (NPI)
I think that if you warp to Kropyvnytskyi, it will be on the bridge, but if you head for the T-shaped signal intersection, it will be near an intersection with many vegetation.
However, I also happen outside of this place (including other maps).
However, I also happen outside of this place (including other maps).
AMD Ryzen 7 7800X3D
ASRock X670E Taichi Carrara
DOMINATOR TITANIUM DDR5-7200 32GB
PNY RTX4070Ti 12GB VERTO LED WE
WD m.2 KIOXIA m.2
ASRock X670E Taichi Carrara
DOMINATOR TITANIUM DDR5-7200 32GB
PNY RTX4070Ti 12GB VERTO LED WE
WD m.2 KIOXIA m.2
Re: [DX11] Help regarding Nvidia Profile Inspector (NPI)
maybe you altered the LOD settings? For vegetation and so... The only places with some "heavy" detail are Kiev, Mariupol and Focsani.
Re: [DX11] Help regarding Nvidia Profile Inspector (NPI)
Here are the settings and settings I just tested with the new profile.
AMD Ryzen 7 7800X3D
ASRock X670E Taichi Carrara
DOMINATOR TITANIUM DDR5-7200 32GB
PNY RTX4070Ti 12GB VERTO LED WE
WD m.2 KIOXIA m.2
ASRock X670E Taichi Carrara
DOMINATOR TITANIUM DDR5-7200 32GB
PNY RTX4070Ti 12GB VERTO LED WE
WD m.2 KIOXIA m.2
Re: [DX11] Help regarding Nvidia Profile Inspector (NPI)
Please wait for a while until it becomes an HD screen.
The last mod of the first video is my own mod for LOD.
LOD is also specified in config.cfg.
However, even if all LOD settings are standard, it will drop to 20 fps.
However, if uset r_sun_shadow_texture_size "8192" is set to 4096, fps will not drop.
I didn't get good results when I changed from GTX 1070 to RTX 2070 Super.
The last mod of the first video is my own mod for LOD.
LOD is also specified in config.cfg.
However, even if all LOD settings are standard, it will drop to 20 fps.
However, if uset r_sun_shadow_texture_size "8192" is set to 4096, fps will not drop.
I didn't get good results when I changed from GTX 1070 to RTX 2070 Super.
AMD Ryzen 7 7800X3D
ASRock X670E Taichi Carrara
DOMINATOR TITANIUM DDR5-7200 32GB
PNY RTX4070Ti 12GB VERTO LED WE
WD m.2 KIOXIA m.2
ASRock X670E Taichi Carrara
DOMINATOR TITANIUM DDR5-7200 32GB
PNY RTX4070Ti 12GB VERTO LED WE
WD m.2 KIOXIA m.2
Re: [DX11] Help regarding Nvidia Profile Inspector (NPI)
@Arayas @Bengan
Thank you.
I will give up here.
Please let us know if you have a good idea.
It's not a mod problem because I've been testing it a lot since 1.36.
Thank you.
I will give up here.
Please let us know if you have a good idea.
It's not a mod problem because I've been testing it a lot since 1.36.
AMD Ryzen 7 7800X3D
ASRock X670E Taichi Carrara
DOMINATOR TITANIUM DDR5-7200 32GB
PNY RTX4070Ti 12GB VERTO LED WE
WD m.2 KIOXIA m.2
ASRock X670E Taichi Carrara
DOMINATOR TITANIUM DDR5-7200 32GB
PNY RTX4070Ti 12GB VERTO LED WE
WD m.2 KIOXIA m.2
Re: [DX11] Help regarding Nvidia Profile Inspector (NPI)
@clear F1
Okay, now I have watched the videos and can see that you get that problem with ONLY RoEx 2.6 activated in the profile.
When I drive there I get a slight dip in FPS too, but ONLY in those T-crossings, minimum at 26 FPS! Maybe Arayas can explain
why there is a dip below 30 right there and nowhere else in that city, Kropyvnytskyi! And those drops I can live with, no
problem at all, they are so short.
Did you test to rename config.cfg to get a fresh copy of that too?
EDIT: Maybe you have something having impact on the V-Sync behavior in your system. That way the FPS flip from r_vsync "2"
to r_vsync "3" giving instant 20 instead of 30, where as I get 29..28...27....26 and back to 30! Just a hunch! The ONLY V-Sync
setting should be in config.cfg, not in NPI and not in NCP or anything in MSI Afterburner/Rivatuner!!!!
Okay, now I have watched the videos and can see that you get that problem with ONLY RoEx 2.6 activated in the profile.
When I drive there I get a slight dip in FPS too, but ONLY in those T-crossings, minimum at 26 FPS! Maybe Arayas can explain
why there is a dip below 30 right there and nowhere else in that city, Kropyvnytskyi! And those drops I can live with, no
problem at all, they are so short.
Did you test to rename config.cfg to get a fresh copy of that too?
EDIT: Maybe you have something having impact on the V-Sync behavior in your system. That way the FPS flip from r_vsync "2"
to r_vsync "3" giving instant 20 instead of 30, where as I get 29..28...27....26 and back to 30! Just a hunch! The ONLY V-Sync
setting should be in config.cfg, not in NPI and not in NCP or anything in MSI Afterburner/Rivatuner!!!!
Re: [DX11] Help regarding Nvidia Profile Inspector (NPI)
The fps was 20 though it may be small and invisible.
I will try config.cfg now.
I will try config.cfg now.
AMD Ryzen 7 7800X3D
ASRock X670E Taichi Carrara
DOMINATOR TITANIUM DDR5-7200 32GB
PNY RTX4070Ti 12GB VERTO LED WE
WD m.2 KIOXIA m.2
ASRock X670E Taichi Carrara
DOMINATOR TITANIUM DDR5-7200 32GB
PNY RTX4070Ti 12GB VERTO LED WE
WD m.2 KIOXIA m.2