TrackIR Driving Enhancements - ATS/ETS2 1.41 to 1.49 - Updated 04/04/2024

[JHTrucker]

TDE Update v4.6 (1.41-1.43) & v5.6 (1.44+) and associated line edits:

New mods:
TrackIR Driving Enhancements v4.6 (1.41-1.43) & v5.6 (1.44+)
TDE (Unsupported) v4.6 (1.41-1.43) & v5.6 (1.44+)
TDE (g_cam_window_block) v4.6 (1.41-1.43) & v5.6 (1.44+)

New - You can now get in/out of your truck via the passenger seat, works the same as the drivers seat. Whilst sat in the passenger seat, with your steering centered, look over your shoulder to look through the window and press 'Action', for outside. Note: You can't put your head out of the passenger window.
Why? Because one day you may be parked too close to an outside object, that would prevent exiting from the drivers side (without clipping through it), so you can now also exit from the passenger side, to refuel, unload etc...
Demo video available, see post 10.

Amended - 'Supported only' - Supplied 'CAM 3: Sleeper' presets amended to be positioned behind the passenger seat looking towards the drivers side rather than previously behind the drivers seat looking towards the passenger side.
You can now choose which side of the sleeper area you want to be positioned at, behind drivers seat looking towards passenger side or behind passenger seat looking towards drivers side, just by looking at the required location from either the drivers seat or the passengers seat and pressing 'Action'.
Note 1: This can be disabled if you'd rather always have your preferred sleeper location.
Note 2: Some trucks have transparent driver/passenger seats when viewed from the sleeper area. I've now included some 'CAM 3: ...sleeper top' presets, for those cabs that have a top bunk fitted as well, to avoid seeing the transparent seats.
Demo video available, see post 10.

Amended - Game default external cameras can now be used to drive, without having to disable TDE code via the menu.
CAM 1 - Keyboard 1 - Game standard driving view.
CAM 2 - Keyboard 2 - NEW - Passenger Seat. *** You cannot drive from this camera ***
CAM 3 - Keyboard 3 - NEW - Sleeper Area. *** You cannot drive from this camera ***
CAM 4 - Keyboard 4 - NEW - Outside truck. *** You cannot drive from this camera ***
CAM 5 - Keyboard 5 - Moved - Game standard chase view.
CAM 6 - Keyboard 6 - Moved - Game standard top down view.
CAM 7 - Keyboard 7 - Moved - Game standard roof view.
CAM 8 - Keyboard 8 - Game standard Drive-By view.
CAM 9 - Keyboard 9 - Moved - Game standard bumper view.
CAM 10 - ALT + Keyboard 9 - Moved - Game standard On-Wheel view.
Note 1: You can switch from (cam 1/2/3/4) to (cam 5/6/7/8/9/10) OR switch from (cam 5/6/7/8/9/10) to (cam 1).
Note 2: You can't switch from an external 'driving' camera (cam 5/6/7/8/9/10) to a 'non-driving' camera (cam 2/3/4) to avoid losing control of your truck.

Amended - "Important" - Outside presets have been renamed - These are the new defaults:
For ATS - Edit your config_local.cfg with the following:
uset g_eye_preset_5 "g:CAM 4 RHD ATS - Path Select"
uset g_eye_preset_4 "g:CAM 4 LHD ATS - Path Select"
OR
For ETS2 - Edit your config_local.cfg with the following:
uset g_eye_preset_5 "g:CAM 4 RHD ETS - Path Select"
uset g_eye_preset_4 "g:CAM 4 LHD ETS - Path Select"

----------

NOTE: * Post 2 and 3 swapped over so menu info is straight after post 1 descriptions and the required line edits are on post 3 before post 4 quick start.
Post 1 - Description
Post 2 - General Menu Information and Usage *
Post 3 - Mods and required file edits *
Post 4 - Quick start guide
etc

Post 1 - Description (updated to suit above changes) - viewtopic.php?p=46457#p46457

Post 3 - Mods and required file edits (updated to suit above changes) - viewtopic.php?p=46459#p46459
Amended 'Date Highlighted' line edits for the following:
config_lines[191]: "mix cam1
config_lines[192]: "mix cam2
config_lines[193]: "mix cam3
config_lines[194]: "mix cam4
config_lines[195]: "mix cam5
config_lines[196]: "mix cam6
config_lines[197]: "mix cam7
config_lines[198]: "mix cam8
config_lines[213]: "mix lookleft
config_lines[214]: "mix lookright
config_lines[235]: "mix lookpos1
config_lines[236]: "mix lookpos2
config_lines[237]: "mix lookpos3
config_lines[238]: "mix lookpos4
config_lines[239]: "mix lookpos5
config_lines[240]: "mix lookpos6
config_lines[241]: "mix lookpos7
config_lines[242]: "mix lookpos8
config_lines[275]: "mix eyeposwmx
config_lines[276]: "mix eyeposwmy
config_lines[277]: "mix eyeposwmz
config_lines[279]: "mix headtryaw
config_lines[282]: "mix headtrx
config_lines[295]: "mix steering
config_lines[296]: "mix msteering
config_lines[297]: "mix mpedals
config_lines[300]: "mix aforward
config_lines[301]: "mix abackward
config_lines[304]: "mix dclutch
config_lines[305]: "mix clutch
config_lines[306]: "mix activate
config_lines[313]: "mix attach
config_lines[510]: "mix eyepreset1
config_lines[511]: "mix eyepreset2
config_lines[512]: "mix eyepreset3
config_lines[513]: "mix eyepreset4
config_lines[514]: "mix eyepreset5

Note: Always ensure you have applied all previous line edit updates (that you may have missed) before applying these or if in doubt, just re-apply all line edits.

OR

Post 4 - Quick start guide - viewtopic.php?p=46460#p46460
New quick start 'TDE controls v4.6 & v5.6 16-02-2024.zip' file. *** You still need to apply any 'optional' edits to this ***

Post 10 - Updated demo videos - viewtopic.php?p=46613#p46613

[JHTrucker]

TDE Update:

New - Automatic animated first person movement, when using 'Look Action' to change to/from driver seat, passenger seat, sleeper area or outside.
This new animated movement can be disabled if you prefer to instantly 'switch to' those positions, like previous TDE versions.

Note: To avoid the possible feeling of motion sickness, turn your real head back to the centre of your monitor once the animation starts (TrackIR is disabled during the animation), your real head will then be in the correct position when the animation stops and TrackIR is re-enabled.
Note: YAW remains active during driver to/from passenger seat as this is a single direction movement, therefore you shouldn't need to move your real head during the animation.

Your options are:
'Move to' mode (new TDE default):
Animated first person movement for enter/exit via driver side only.
Animated first person movement for driver seat to/from passenger seat.
Animated first person movement for driver seat to/from sleeper area.
OR
'Switch to' mode:
Instant enter/exit driver side or passenger side.
Instant change for driver seat to/from passenger seat.
Instant change for driver seat to/from sleeper area.
Instant change for passenger seat to/from sleeper area.
See post 6 'Optional edits' for more info.


New - Optional extra mod for changing the outside FOV.
The TDE default 'outside' FOV is 49, if that's too close for you then you can increase it to 55, 60, 65, 70 or 75 by adding one of the 'optional' mods.
See post 6 "Optional edits" for more details.


Due to the 60,000 character limit for forum posts, I've had to make a slight adjustment in the post order.
The required line edits are now spread across post 3 & 4.
The quick start guide is now post 5.


There's no changes required to the current mod versions, v4.6 & v5.6, only the new controls.sii file line edits are required for this update.

Post 1 - Description (updated to suit above changes) - https://roextended.ro/forum/viewtopic.p ... 457#p46457

Post 3 & 4 - Mods and required file edits (updated to suit above changes) - https://roextended.ro/forum/viewtopic.p ... 459#p46459

Amended 'Date Highlighted' line edits for the following:
config_lines[154]: "mix dbgfovup
config_lines[155]: "mix dbgfovdown
config_lines[156]: "mix dbgfovreset
config_lines[157]: "mix dbgshowhud
config_lines[158]: "mix dbgchngpip
config_lines[159]: "mix dbgnextmode
config_lines[160]: "mix dbgdraw
config_lines[191]: "mix cam1
config_lines[195]: "mix cam5
config_lines[201]: "mix camwnd
config_lines[235]: "mix lookpos1
config_lines[236]: "mix lookpos2
config_lines[237]: "mix lookpos3
config_lines[238]: "mix lookpos4
config_lines[239]: "mix lookpos5
config_lines[240]: "mix lookpos6
config_lines[241]: "mix lookpos7
config_lines[242]: "mix lookpos8
config_lines[243]: "mix lookpos9
config_lines[275]: "mix eyeposwmx
config_lines[278]: "mix headtron
config_lines[279]: "mix headtryaw
config_lines[280]: "mix headtrpitch
config_lines[281]: "mix headtrroll
config_lines[282]: "mix headtrx
config_lines[283]: "mix headtry
config_lines[284]: "mix headtrz
config_lines[299]: "mix msteering
config_lines[306]: "mix activate
config_lines[510]: "mix eyepreset1
config_lines[511]: "mix eyepreset2
config_lines[512]: "mix eyepreset3
config_lines[513]: "mix eyepreset4
config_lines[514]: "mix eyepreset5

Note: Always ensure you have applied all previous line edit updates (that you may have missed) before applying these or if in doubt, just re-apply all line edits.

OR

Post 5 - Quick start guide - https://roextended.ro/forum/viewtopic.p ... 461#p46461
New quick start 'TDE controls v4.6 & v5.6 04-04-2024.zip' file. *** You still need to apply any 'optional' edits to this ***