ATS/ETS2 Screen configs for Single, Dual, Triple or Quad screen setups.

Make your game even better
TTVOGVampire
Posts: 3
Joined: March 17th, 2023, 2:32 pm

Re: ATS/ETS2 Screen configs for Single, Dual, Triple or Quad screen setups.

Post by TTVOGVampire » March 17th, 2023, 2:38 pm

I am currently using Nvidia surround at 3480x1080
User avatar
JHTrucker
Expert
Posts: 1330
Joined: February 7th, 2020, 3:19 pm
Location: UK

Re: ATS/ETS2 Screen configs for Single, Dual, Triple or Quad screen setups.

Post by JHTrucker » March 17th, 2023, 8:06 pm

@TTVOGVampire - I assume you mean this --> Dual Monitor AA setup with Advisor/large map on second screen (updated 16/05/2020).

You shouldn't just use it as is, because SCS seemingly make changes to the advisor with every update.
I gave it as an idea and included everything I did so anyone could just apply those settings to newer game files...
There's only 2 files that need editing, map_data.sii & adviser_map.sii, you say 1.76, do you mean 1.46? I don't use beta's and so I can't help with 1.47.
I'll make an ATS 1.46 version, if that's what you want, but my ETS2 is still 1.41.

EDIT:
I've added 1.46 versions on the post:
Dual Monitor AA setup with Advisor/large map on second screen
https://roextended.ro/forum/viewtopic.p ... 665#p17665
multimon_config.sii files: viewtopic.php?p=17658#p17658
controls.sii edits: viewtopic.php?p=24744#p24744
TrackIR edits: viewtopic.php?p=46613#p46613
Extra Cameras: viewtopic.php?p=46034#p46034
Jaykop
Posts: 4
Joined: May 13th, 2023, 1:47 am

Re: ATS/ETS2 Screen configs for Single, Dual, Triple or Quad screen setups.

Post by Jaykop » May 13th, 2023, 2:03 am

Best setting for Samsung g9 49" monitor anyone thanks in advance
User avatar
JHTrucker
Expert
Posts: 1330
Joined: February 7th, 2020, 3:19 pm
Location: UK

Re: ATS/ETS2 Screen configs for Single, Dual, Triple or Quad screen setups.

Post by JHTrucker » May 13th, 2023, 9:14 pm

@Jaykop - Did you look at the first post and my link for 'ready to use' multimon_config.sii files?

Try this one:
Single ultra wide curved monitor AA setup - (using triple image with reduced side angles) (Updated 19/02/2021).
https://roextended.ro/forum/viewtopic.p ... 550#p20550

And make sure you do this:
Place the multimon_config.sii file in the same folder where you have your global config.cfg file.
Edit the following line in that global config.cfg file, to the following:
uset r_multimon_mode "4" <--Tells the game to use the multimon_config.sii file we just installed.

And read that post for other help info.

Other than that someone else with your type of monitor will have to help.
multimon_config.sii files: viewtopic.php?p=17658#p17658
controls.sii edits: viewtopic.php?p=24744#p24744
TrackIR edits: viewtopic.php?p=46613#p46613
Extra Cameras: viewtopic.php?p=46034#p46034
Jaykop
Posts: 4
Joined: May 13th, 2023, 1:47 am

Re: ATS/ETS2 Screen configs for Single, Dual, Triple or Quad screen setups.

Post by Jaykop » May 13th, 2023, 11:09 pm

Thankyou will give this a try as I've just got a 4090 today
broddi
Posts: 1
Joined: October 30th, 2023, 1:32 am

Re: ATS/ETS2 Screen configs for Single, Dual, Triple or Quad screen setups.

Post by broddi » November 14th, 2023, 12:08 am

a1337cookie wrote:
September 14th, 2021, 11:39 pm
@Widdowmaker101

Well, I made the split middle LHD file. As I said earlier, it attempts to compensate for the curvature of the middle screen by splitting the view in half and slightly angling each side. I assumed that the monitor has an 1800R curve, and that the previously supplied width of 121cm ignores the curvature. Calculations are based off of this (somewhat messy) diagram.

Image

I tested it on my game, here is a screenshot and a simulation of what it should look like on your monitors.

Image

Image

Compared to the others, it seems like there is a tiny bit of misalignment on the left. I double checked some of the math, but couldn't spot any issues. Oh well, shouldn't be too noticeable. Here's the file.

multimon_config.sii
Hi

I hope this isn't a stupid question.
I have almost the same setup as Widdowmaker101. I have really tried to figure out how to navigate the calculator but it just get messed up.
So I tried one of the files that was posted to Widdowmaker101 and it was the best so far.
The problem is that I can't figure out how to download this file that you linked in this post.
I would be very grateful if I could try that one out since I think that would be perfect.

Thank you in advance
a1337cookie
Posts: 119
Joined: June 14th, 2021, 2:11 am

Re: ATS/ETS2 Screen configs for Single, Dual, Triple or Quad screen setups.

Post by a1337cookie » November 14th, 2023, 10:00 am

@broddi - Yeah, looks like the download's not there anymore. It can definitely be recreated using the calculator though, the "Curved Monitor Setups" section in my guide contains this situation. It's a center curved screen with flat side screens, where the center is split into 2, and an LHD offset is applied. Sounds like a lot, but it should be doable if you follow the guide step by step. Let me know which step you have trouble with or what problem you have and I can help you.

I'm working on a better way to set up LHD/RHD, curve compensation, and virtual screen space. Everything will be combined into one calculator where you can apply those options with simple dropdowns, no need for copy paste or figuring out what goes where. It's going to take me a while to get it all working, but hopefully it will be much easier to configure a setup like this in the future.
Wifiik
Posts: 2
Joined: November 28th, 2023, 9:55 pm

Re: ATS/ETS2 Screen configs for Single, Dual, Triple or Quad screen setups.

Post by Wifiik » November 28th, 2023, 10:05 pm

Hello,
I have this problem in versions 1.48 / 1.49 (maybe lower, idk)
DAF XF missing texture in the rear-view mirror (UPDATED)



HW and others:

⠀•  ⠀CPU:  AMD Ryzen 5 5500
•  ⠀GPU: Sapphire Radeon RX 6700 10GB
⠀•  ⠀RAM: Kingston Fury Beast RGB 32GB
⠀•  ⠀MB: MSI B450-A PRO MAX
⠀•  ⠀HDD: Toshiba P300, 3,5" - 2TB
⠀•  ⠀SSD 1: Kingston KC3000 NVMe 2TB
⠀•  ⠀SSD 2: Kingston A2000, M.2 - 1TB + AXAGON PCEM2-DC
⠀• Monitors: AOC C24G2AE/BK Gaming 24" 2x


I use a modified setings to play on two monitors.
For connecting monitors I use AMD adrenalin driver with Eyefinity function.

gamelog:
config.cfg:
multimon_config.sii:

What is my problem:

When I am in the basic cab view, for some reason the truck chassis does not appear in the left rear view mirror.
Everything's fine in the right mirror...
When I look at the view from the outside, the chassis is normally visible..
-The problem only occurs with the DAF XF truck, 105 and new ones work fine. For example.
⠀•UPDATE: As I searched for more and more ways, I found that when I open the mirror settings, suddenly the missing texture is visible. As soon as I close the settings, the texture disappears. I am therefore adding more screenshots to the album.

For testing, I also used a completely new, clean profile with a clean install of the game.
But I still can't figure out what it could be. The only thing I can think of is the problem with the modified view. But that itself only adjusts the view position. (?)

Anyone have any idea what it could be?
However, a similar problem has been reported as a bug at least once, but I have no idea how it turned out.
If necessary, I'll be happy to explain. But now I don't know how best to describe the problem.

Thank you, and have a nice day.
User avatar
JHTrucker
Expert
Posts: 1330
Joined: February 7th, 2020, 3:19 pm
Location: UK

Re: ATS/ETS2 Screen configs for Single, Dual, Triple or Quad screen setups.

Post by JHTrucker » November 30th, 2023, 1:59 am

@Wifiik - Try this...

mirrors may cause your truck to be shown in the mirror with missing parts.
If that happens, make this change:
Your Profile - config_local.cfg - uset g_baked_vehicle "0" (Game default "1")
multimon_config.sii files: viewtopic.php?p=17658#p17658
controls.sii edits: viewtopic.php?p=24744#p24744
TrackIR edits: viewtopic.php?p=46613#p46613
Extra Cameras: viewtopic.php?p=46034#p46034
Wifiik
Posts: 2
Joined: November 28th, 2023, 9:55 pm

Re: ATS/ETS2 Screen configs for Single, Dual, Triple or Quad screen setups.

Post by Wifiik » November 30th, 2023, 5:51 pm

@JHTrucker

Thank you very much for your advice. It's working! WORKING :D
I don't know how it's possible that the problem is only on one truck, but this solved it.
I can't tell you how grateful I am!
If I can somehow repay you, just let me know. When searching for a solution to this problem, I was truly desperate and losing hope.

Thank you once again and have a greatl day.
Post Reply