[DX11] Help regarding Nvidia Profile Inspector (NPI)

Make your game even better
Ghastous
PPM
Posts: 13
Joined: September 15th, 2021, 12:58 am

Re: [DX11] Help regarding Nvidia Profile Inspector (NPI)

Post by Ghastous » September 15th, 2021, 1:37 pm

Its all good i messed up 1 of the settings. Ive had to go with 2xMSAA though as i lost way to mucg fps with 4xMSAA even on a 1080ti
User avatar
JHTrucker
Expert
Posts: 1330
Joined: February 7th, 2020, 3:19 pm
Location: UK

Re: [DX11] Help regarding Nvidia Profile Inspector (NPI)

Post by JHTrucker » September 16th, 2021, 2:17 pm

@Ghastous - A 1080ti at single 1920x1080 upto triple 5760x1080 should be able to do 4xMSAA at 60fps.
So unless your resolution is much higher or you consider 60fps too low, then yes 2xMSAA for you.
multimon_config.sii files: viewtopic.php?p=17658#p17658
controls.sii edits: viewtopic.php?p=24744#p24744
TrackIR edits: viewtopic.php?p=46613#p46613
Extra Cameras: viewtopic.php?p=46034#p46034
Ghastous
PPM
Posts: 13
Joined: September 15th, 2021, 12:58 am

Re: [DX11] Help regarding Nvidia Profile Inspector (NPI)

Post by Ghastous » September 16th, 2021, 4:07 pm

My resoultion is not 1080p im on 1440p and my monitor res is 3440x1440

Also do u need to have shadow quality on ultra cos if i change it then it takes the AA off the game.
User avatar
JHTrucker
Expert
Posts: 1330
Joined: February 7th, 2020, 3:19 pm
Location: UK

Re: [DX11] Help regarding Nvidia Profile Inspector (NPI)

Post by JHTrucker » September 17th, 2021, 1:30 am

@Ghastous - No, shadows have no impact on AA working or not, just 100% scaling, AA bit, 2 or 4xMSAA, 2 or 4xSGSS.
Just ensure you have steps 1 to 3 correctly set.
Ultra shadows are blurry around the edges whereas high to low aren't and this AA doesn't apply AA to shadows. So perhaps that's what you are seeing and thinking AA is off? 2xAA is OK, but you really should use 4xAA for best image quality.
You can have better shadows by settings this: uset r_sun_shadow_texture_size "8192"

Quick test for AA working, look at cam 1 and move the view around, change to 125% scaling and look around again. If both looked the same then you don't have AA working. Set back to 100% and check settings.
The vast majority of shimmering/flickering is gone with 4xAA and so the image will look much better when looking around or driving.

So you don't get at least 60fps with that res or 60 is too low for you?

I have GTX760 at 3840x1024 and so use 2xMSAA with shadows on LOW at 30fps. I can use 4x but then it drops into the 20's far too often.
multimon_config.sii files: viewtopic.php?p=17658#p17658
controls.sii edits: viewtopic.php?p=24744#p24744
TrackIR edits: viewtopic.php?p=46613#p46613
Extra Cameras: viewtopic.php?p=46034#p46034
Ghastous
PPM
Posts: 13
Joined: September 15th, 2021, 12:58 am

Re: [DX11] Help regarding Nvidia Profile Inspector (NPI)

Post by Ghastous » September 17th, 2021, 2:32 am

@JHTrucker thats a bit weird then cos when i changed shadows from ultra to high it turned my AA off and i can tell cos normally my fps when not in a city arer 72fps but it shot up to 90 which is my cap so i saved a reloaded and it was all back to normal. I do have shadows on 8192. as i followed most of that guide. Just a shame i cant get a decent fps with 4xmsaa but then again msaa is a system hog which is why 99% of games dont use it now.
User avatar
JHTrucker
Expert
Posts: 1330
Joined: February 7th, 2020, 3:19 pm
Location: UK

Re: [DX11] Help regarding Nvidia Profile Inspector (NPI)

Post by JHTrucker » September 17th, 2021, 8:02 pm

@Ghastous - Yes msaa is demanding but as these games don't support it then we are brute forcing it on to them.
The problem with low fps is probably not helped by the new lighting system...
multimon_config.sii files: viewtopic.php?p=17658#p17658
controls.sii edits: viewtopic.php?p=24744#p24744
TrackIR edits: viewtopic.php?p=46613#p46613
Extra Cameras: viewtopic.php?p=46034#p46034
0xExtern
Posts: 14
Joined: April 3rd, 2021, 10:33 am

Re: [DX11] Help regarding Nvidia Profile Inspector (NPI)

Post by 0xExtern » September 18th, 2021, 3:04 pm

Hi everyone is there a way to use V-Sync only while driving? Because setting v-sync in the config.cfg file makes the game load very slower : (
bt103504
Posts: 1
Joined: September 18th, 2021, 5:48 pm

Re: [DX11] Help regarding Nvidia Profile Inspector (NPI)

Post by bt103504 » September 18th, 2021, 5:54 pm

Is anyone aware of how we could increase the vegetation scenery LOD. I know Oliver outlined a process in the "Graphics related LOD changes in top-most game_data.sii" section that no longer appears to be working. Is there a mod that exists presently that would allow those setting changes to be made (or already have the changes made)?

Thanks!
User avatar
JHTrucker
Expert
Posts: 1330
Joined: February 7th, 2020, 3:19 pm
Location: UK

Re: [DX11] Help regarding Nvidia Profile Inspector (NPI)

Post by JHTrucker » September 20th, 2021, 1:06 am

@0xExtern - Why not set 'vsync force on' in NPI and keep game vsync off / '0'?
I use vsync in game and never noticed slow loading...
multimon_config.sii files: viewtopic.php?p=17658#p17658
controls.sii edits: viewtopic.php?p=24744#p24744
TrackIR edits: viewtopic.php?p=46613#p46613
Extra Cameras: viewtopic.php?p=46034#p46034
Ghastous
PPM
Posts: 13
Joined: September 15th, 2021, 12:58 am

Re: [DX11] Help regarding Nvidia Profile Inspector (NPI)

Post by Ghastous » September 20th, 2021, 2:42 am

@JHTrucker i did the 125% scaling and no difference at all so for me MSAA doesnt work as ive reset and tried again and the same so might aswell revert back to normal AA again

done some more testing and when loading the game AA works but change the scaling and it takes AA off 4xMSAA i get 44fps turn scaling up to 125% my fps goes back up to 90fps so its turning it off. Restart of the game AA comes back on.

Reason for low fps is im using Jon Rudda trucks which are insane ammount of detail compated to SCS trucks which are a bit meh tbh lol
Post Reply