[DX11] Help regarding Nvidia Profile Inspector (NPI)

Make your game even better
User avatar
BenganJ
Moderator
Posts: 9919
Joined: December 15th, 2018, 11:54 am
Location: Gothenburg, Sweden

Re: [DX11] Help regarding Nvidia Profile Inspector (NPI)

Post by BenganJ » April 18th, 2021, 3:03 am

@Marx

No, no difference. So, either you post your config.cfg and as many screenshots it takes to cover the whole of NPI,
OR you start from scratch and do ONLY the first 3 steps and then check if you get any AA. Your choice!
---------------------------------------------------------------------------------------------------------------------------------------------
System: Windows 8.1
Processor: Intel Core i7-4790@
Memory: 16GB
Graphics: ASUS GeForce GTX1660Ti
Image
black-coffee
Posts: 81
Joined: February 27th, 2020, 2:37 pm

Re: [DX11] Help regarding Nvidia Profile Inspector (NPI)

Post by black-coffee » April 18th, 2021, 1:07 pm

Guys, I've been playing around with the settings and noticed it works as did before 1.40. First, you need to play at the native resolution of your monitor, any other resolution will introduce blurriness because of the way this AA works. Secondly, in NPI I have set anisotropic filtering at 16x and the texture quality to Very High. Now everything looks sharp and smooth at the same time... :big_boss:

Image
User avatar
BenganJ
Moderator
Posts: 9919
Joined: December 15th, 2018, 11:54 am
Location: Gothenburg, Sweden

Re: [DX11] Help regarding Nvidia Profile Inspector (NPI)

Post by BenganJ » April 18th, 2021, 1:15 pm

@black-coffee

That's the STANDARD settings mate, no new stuff there!
---------------------------------------------------------------------------------------------------------------------------------------------
System: Windows 8.1
Processor: Intel Core i7-4790@
Memory: 16GB
Graphics: ASUS GeForce GTX1660Ti
Image
black-coffee
Posts: 81
Joined: February 27th, 2020, 2:37 pm

Re: [DX11] Help regarding Nvidia Profile Inspector (NPI)

Post by black-coffee » April 18th, 2021, 1:24 pm

Might be but it looks fine to me now, I was playing at a different resolution than my monitor's native 3440x1440.
User avatar
BenganJ
Moderator
Posts: 9919
Joined: December 15th, 2018, 11:54 am
Location: Gothenburg, Sweden

Re: [DX11] Help regarding Nvidia Profile Inspector (NPI)

Post by BenganJ » April 18th, 2021, 1:33 pm

@black-coffee

Right, and we've said that MANY times, especially in regard to running in DSR mode, that it is VERY
important to run at the DSR resolution AND to have the desktop resolution set to the same, as then
you really get the 100% correspondence needed for AA to work.
---------------------------------------------------------------------------------------------------------------------------------------------
System: Windows 8.1
Processor: Intel Core i7-4790@
Memory: 16GB
Graphics: ASUS GeForce GTX1660Ti
Image
Marx
PPM
Posts: 43
Joined: January 24th, 2020, 12:55 am

Re: [DX11] Help regarding Nvidia Profile Inspector (NPI)

Post by Marx » April 18th, 2021, 8:18 pm

I configured the DX11 graphics again, went through steps 1 to 3. No change. Went to the Trouble shooting common possible issues (Q&A): scaling = 100%, reinstalled the single monitor multimon file (I do have two monitors but run ETS2 only on the Omen HP 35), run on native resolution 3440x1440, picked 4x Sparse Gird MSAA, checked the integrity of the ETS2 files and finally deleted the config.cfg file and re-edited the config.cfg again, no change. I seem to be missing something. I did have a perfectly working ETS2 before, with AA working without any problems.
User avatar
BenganJ
Moderator
Posts: 9919
Joined: December 15th, 2018, 11:54 am
Location: Gothenburg, Sweden

Re: [DX11] Help regarding Nvidia Profile Inspector (NPI)

Post by BenganJ » April 18th, 2021, 8:23 pm

@Marx

Damn, you've been really busy! Well, then I suggest that you do what I said before, post your latest game log,
it gives more info than the plain config.cfg, and also as many screenshots it takes to show full NPI settings.
---------------------------------------------------------------------------------------------------------------------------------------------
System: Windows 8.1
Processor: Intel Core i7-4790@
Memory: 16GB
Graphics: ASUS GeForce GTX1660Ti
Image
User avatar
JHTrucker
Expert
Posts: 1330
Joined: February 7th, 2020, 3:19 pm
Location: UK

Re: [DX11] Help regarding Nvidia Profile Inspector (NPI)

Post by JHTrucker » April 18th, 2021, 9:48 pm

@Marx - "I did have a perfectly working ETS2 before, with AA working without any problems."
Before as in DX9 days? If so make sure the AA bit is set in the right NPI slot not the DX9 one.

Note: The menu is scaled at 99% and therefore this AA isn't applied to it... so don't judge it via menu screens.
multimon_config.sii files: viewtopic.php?p=17658#p17658
controls.sii edits: viewtopic.php?p=24744#p24744
TrackIR edits: viewtopic.php?p=46613#p46613
Extra Cameras: viewtopic.php?p=46034#p46034
Marx
PPM
Posts: 43
Joined: January 24th, 2020, 12:55 am

Re: [DX11] Help regarding Nvidia Profile Inspector (NPI)

Post by Marx » April 19th, 2021, 1:07 am

Here are the NPI setting. I hope you can find the the issue.
Image

Image
User avatar
BenganJ
Moderator
Posts: 9919
Joined: December 15th, 2018, 11:54 am
Location: Gothenburg, Sweden

Re: [DX11] Help regarding Nvidia Profile Inspector (NPI)

Post by BenganJ » April 19th, 2021, 1:12 am

@Marx

But to get the full picture I also need your latest game log.
This is how you post it: viewtopic.php?p=36327#p36327
---------------------------------------------------------------------------------------------------------------------------------------------
System: Windows 8.1
Processor: Intel Core i7-4790@
Memory: 16GB
Graphics: ASUS GeForce GTX1660Ti
Image
Post Reply